EPROM Eraser
Eprom Eraser Can erase 6 chips at the same time..
EPROM Eraser
Instruction Manual
EPROM Eraser
This EPROM Eraser is to erase the EPROM chips by Ultraviolet Radiation. It has nice appearance, fine structure and good stability.
Index:
Power requirement : AC 220V±20%
Working Frequency : 43Hz-57Hz
Working Temperature: -10°C - 40°C
Working Humidity: 20%~90% relative
Precaution:
Please check whether the input voltage is correct before operation!
Operation:
1.Press down the Power Switch to “ON” (for 6pcs type only).
2.When the timer is set to “ON”, the eraser is in the status of continuous working.
3.Turn the timer clockwise to set the working period. One cycle is 60 minutes.
Warranty and Caution:
The warranty period is one year. To prevent damage, please do not open and assemble it
by yourself and transfer it to qualified electricians or the distributor if any problem occurs.
Remark:
Size: 6pcs type : 160x120x48mm
EPROM Eraser
Instruction Manual
EPROM Eraser
This EPROM Eraser is to erase the EPROM chips by Ultraviolet Radiation. It has nice appearance, fine structure and good stability.
Index:
Power requirement : AC 220V±20%
Working Frequency : 43Hz-57Hz
Working Temperature: -10°C - 40°C
Working Humidity: 20%~90% relative
Precaution:
Please check whether the input voltage is correct before operation!
Operation:
1.Press down the Power Switch to “ON” (for 6pcs type only).
2.When the timer is set to “ON”, the eraser is in the status of continuous working.
3.Turn the timer clockwise to set the working period. One cycle is 60 minutes.
Warranty and Caution:
The warranty period is one year. To prevent damage, please do not open and assemble it
by yourself and transfer it to qualified electricians or the distributor if any problem occurs.
Remark:
Size: 6pcs type : 160x120x48mm
